Whilst this is relatively self explanatory there are a few things around doing this that are useful to know Log into the SDX and go to Configuration > Management Service > Backup Files > Action > Factory Reset You will be presented with the following three options Explained here: Reset (Without Network Configuration)—Retain the IP addresses […]
Situation: We restored a ns.conf file to a Citrix Netscaler VPX running on an Netscaler SDX platform, however the device didnt come back online and the instance remained RED on the SDX interface. Typically the ipaddress of the SDX XenServer is 1 greater than the host By default the SDX SVM (Management Service) will be […]
SItuation: Channels (LA/x) in the VPX do not exist nor are they passed through when provisioned from the SDX netscaler device. Resolution: The channels are created only once, so if they are deleted or the devices are restored to another device then you must remove all channels, add a dummy channel like 1.8, reboot the VPX, then […]
To Backup the licence file SDX License location is /flash/mpsconfig/license/*.lic Via SCP copy the file from this location to a safe offsite location To Restore the Licence file System > Licenses > Manage Licenses > Upload License File + Browse Browse to your .LIC file location – upload and apply.
When adding a new cert (or replacement cert) from the command line we received the above error. The original key was used with openssl and there was no passphrase for the key file. Simply converting the key (not the cert) from the Netscaler shell worked using the following command: openssl rsa -in ‘originalkeyfile’ –out ‘newkeyfile’ fixes the file and […]
Build Citrix Cloud Platform Server on CentOS NOTE: this document is a first draft – this was a quick setup in a dev environment where the host, management and NFS services were all on the same box. I got it working, hopefully this helps anyone else trying to do the same. ‘#’ = type in […]
According to citrix’s article (that applied to the wrong version of PVS) http://support.citrix.com/article/CTX126307 try rebooting the Citrix SOAP service My fix however was simply change the Microsoft Volume Licensing option on the VDISK to NONE, OK, then change it back.
We upgraded our netscalers to NS10.0 Build: 70.7 nc. After authenticating with our AD credentials we would sometimes (all the time) get a blank console pointing to the address http://NETSCALER/menu/neo Workaround: Log in and point the console to http://NETSCALER/menu/guia Solution: ?
These are the keys we imported and exported before finally using Appsense Personalisation These were used in conjunction with a mandatory profile. Remember that a mandatory profile will not work well with I.E or user based certificates. There is another post here about changing the user to look like a ‘non mandatory’ user for the duration […]
The following commands will recreate or open a ‘Printers’ folder rundll32.exe shell32.dll,SHHelpShortcuts_RunDLL PrintersFolder %windir%explorer.exe /e,::{2227A280-3AEA-1069-A2DE-08002B30309D} control.exe printers This can be used to publish a printers folder via Citrix XenApp %windir%explorer.exe /e,::{2227A280-3AEA-1069-A2DE-08002B30309D